Huawei Y7 2018 (LDN-L03)

Brand: Huawei
Model: LDN-L03

OS Version: Android 8.0 (Oreo), EMUI 8
Size : 1.61GB

Language: English

Network: GSM/HSPA/LTE

Display: IPS LCD (5.99 Inch)

Resolution: 720 x 1440 pixels

Dimensions: 158.3 x 76.7 x 7.8 mm

Weight: 155g

Chipset: Qualcomm MSM8937 Snapdragon 430 (28 nm)

CPU: Octa-core

GPU: Adreno 505

Camera: 13MP (Main) 8MP (Selfie)

Download

How to install ?

Prerequisites:

Before you begin, ensure the following:

  1. Your device is a Huawei Y7 2018 (LDN-L03).
  2. The firmware you have is compatible with the Huawei Y7 2018 (LDN-L03).
  3. Your device has at least 70% battery charge.
  4. A USB cable is available to connect your device to the computer.
  5. You have a Windows PC with administrative access.

1. Downloads:

  • Huawei USB Drivers: Install the official Huawei USB drivers on your computer.
  • Huawei Flash Tool: Download and extract the latest Huawei Flash Tool (e.g., HiSuite or an appropriate tool for your firmware type).
  • Huawei Y7 2018 Firmware: Ensure you have the correct firmware version for LDN-L03. Extract the firmware ZIP file on your computer.

2. Install Huawei USB Drivers:

  • Download the Huawei USB Drivers.
  • Run the installer and follow the on-screen instructions to install the drivers.
  • Restart your computer after installation.
  • Skip this step if Huawei USB drivers are already installed.

3. Prepare Huawei Flash Tool:

  • Extract the downloaded Huawei Flash Tool ZIP file to a folder on your computer.
  • Open the extracted folder and locate the tool’s executable file (e.g., HiSuite or other flashing tools).
  • Launch the tool as an administrator.

4. Load the Firmware:

  • In the Flash Tool, locate the option to load firmware or an update file.
  • Navigate to the extracted Huawei Y7 2018 firmware folder.
  • Select the firmware update package (e.g., UPDATE.APP) and load it into the tool.

5. Enter Fastboot/Download Mode:

  • Power off your Huawei Y7 2018.
  • Press and hold the Volume Down button while connecting the device to your computer using a USB cable.
  • The device will enter Fastboot or Download Mode, allowing the tool to detect it.

6. Flash the Firmware:

  • Once the tool detects the device, ensure the firmware file is correctly loaded.
  • Click the Start or Download button to begin the flashing process.
  • Wait patiently for the process to complete. Avoid disconnecting the device during the flashing.

7. Flashing and Completion:

  • After the process is complete, you will see a success message or a green checkmark in the tool.
  • Disconnect your Huawei Y7 2018 from the computer and reboot it.

8. Final Steps:

  • The first boot may take longer than usual; wait patiently.
  • Complete the on-screen setup once the device restarts.
Important Notes:
  • Backup Your Data: Flashing firmware will erase all data. Back up your files beforehand.
  • Correct Firmware: Ensure the firmware matches the Huawei Y7 2018 (LDN-L03) and is for the correct region/version.
  • Stable Connection: Use a high-quality USB cable and avoid interruptions during the flashing process.
  • Issue Resolution: If the process fails or the device isn’t detected, reinstall the drivers or try a different USB port/cable.
Note:

These steps are standard for flashing Huawei devices. Variations may occur depending on the firmware type or tool used. Always consult official Huawei resources or documentation for the most precise and up-to-date instructions.

Scroll to Top